**The paint colour shades displayed are indicative and not precise representation of our actual paint colours which may vary based on your screen resolution and setting. Kindly visit us or your nearest paint dealer to get colour cards for more accurate colour shade.
Sancora I-Emulsion is a good quality value for money, acrylic copolymer interior emulsion paint. It is generally formulated to protect and decorate normal interior walls and ceiling surfaces.
☘️ Matt finishing.
🎨 suitable for Interior wall 🧱, ceiling, plaster, partition & gypsum board.
🏡Suits for low budget 💰 renovation.
🌴 Water 💦 based, Easy application
🥫Pack Size 1 litre, 5 litres and 15 litres.
Composition Pigment : Organic and Inorganic
Binder : Acrylic Copolymer Emulsion
🧱Theoretical Coverage : Approx. 11 - 13m2
/litre (Depending on surface evenness)
☀️Drying Time: Single coat at standard thickness (28ºC, 50% RH)
Touch Dry ≤ 45 minutes
Hard Dry ≤ 2 hours
Recoating Time : 2 hours
💦Thinner/Cleaner : Water
🖌️Application Brush/Roller:
For normal use, thinning is not necessary. To assist application, can be thinned up
to 5% by volume with water.
🌬️Conventional Air spray : Thin 5 - 15% by volume with water and adjust to requirement.
Airless Spray: Thinning is not required. To assist application, can be thinned 5 - 15% by volume With water.
🧽Surface Preparation
🆕General/New:
Surfaces must be sound, clean, dry and free from all defective or poorly adhering
materials, dirt, grease or wax. To have better finish, rub down surface using
suitable abrasive and dust off. For the best result, seal with one coat of appropriate
wall sealer.
🏚️Previously Painted :
Remove all loose, defective and unstable paint film or powdery residue by brushing
thoroughly and scraping. Repair minor defects and cracks with suitable filler.